Flex

Nine Reasons to choose Flex Radio Control from Crane Services

TWO Transmitters

Each system comes complete with a spare transmitter in either 4, 8 or 12 button configurations, in case you accidentally damage or lose one.

Quality

Unlike many other radio remote control systems, Flex systems use top-quality microprocessors (encoding, decoding and RF) from well-known chip manufacturers such as MICROCHIP and CHIPCON. Every system is bench tested for 72 hours before delivery.

Cost

Competitively priced, this system is amazing value.

Ex-Stock Availability

All standard and some special systems are available for immediate despatch or collection.

User Programmable

The Flex system is equipped with more than 200 user-programmable functions to suit all types of applications – no specialist programming is required.

Unique I-CHIP Design

The I-CHIP functions similar to SIM cards used on mobile phones, with the ability for the user to transfer information and settings from one transmitter to another. The Flex system can also be set to full continuous transmission via the I-Chip setting (range: 1~60 minutes or continuous).

Durable & Rugged Enclosures

The transmitter and receiver enclosures are manufactured from industrial-strength nylon and fibreglass composite materials that are highly resistant to breakage and deformation even in the most aggressive environments. The enclosures are protected electrically to IP66.

Experience

Established for over 50 years, Crane Services has the knowledge and expertise to offer a comprehensive back-up and repair service within 24 hours.

Certification

Flex systems are authorised to carry the following certifications:

EN 954-1:1996 CAT-3
EN 60204-32:1998
BS EN 13557:2003 (Annex C)
EN 300 200-3 V1.1.1 (R&TTE)
EN 301 489-3 V1.4.1 (EMC)
EN 60950:2000
FCC Rules Part-15
Industry Canada RSS-210

These are the safety requirements under EU Standards (safety of machinery and radio remote control). Flex systems are certified by TUV and Nemko who are authorised as a Notified Bodies within the EU.

Flex 4EX on Stahl chain hoist

The complete range of systems are available in special configurations e.g. operation of up to 9 receivers from 1 transmitter for switching multiple hoists or cranes in any permutation; tandem operation of two cranes from a single transmitter or individually selectable from a single transmitter. Other special configurations and complete turnkey solutions available on request with full documentation and installation if required.

Ergonomic and Lightweight
Durable and Rugged
Safe and Reliable
Fully Sealed Enclosures (IP-66)
62 User Programmable Channels
Automatic Channel Scanning Receiver
Unique I-CHIP Design
Removable Power Key Switch

Testimonial: Essar Steel

“Their staff are extremely knowledgeable and professional and, unlike competitors radio remote control systems that are fragile and unreliable, we have found Flex Radio to be a perfect addition to our lifting and moving solutions. We now have Flex Radio Controls systems on all of our cranes.”

Martin Skidmore, Essar Steel

Transmitter Options

The Flex 4EX, 4 button system is designed for a two motion operation hoist. For example (1) Raise and lower (top two buttons) & left and right travel motions (bottom two buttons). (2) For any machine requiring up to 4 separate functions requiring one or two stages of operation. (3) The system can be programmed for more complex functions, e.g. latched outputs for floodlight control, selector switches and other special functions. The unit has dual depression buttons as standard for two speed control.

Flex applications at Reid Structural

The Flex 8EX, 8 button system is the industry standard for the overhead crane, being capable of controlling both long and cross travel motions with independent control of two hoist units plus the optional pre selection of up to 4 crab units. All functions are equipped with dual depression buttons for twin speed operation. All buttons are user configurable with up to 200 functions available giving options such as 3 or 4 wire operation, special control functions for operation of dual speed motors, magnet control, 3 speed operation etc. The system is also capable of other diverse applications where remote control of mobile equipment is required, e.g. railway maintenance vehicles, pump controls, winch systems.

This small receiver for the Flex 4 system is ideal for mounting on a small hoist because of its compact size and little weight.

The Flex 12EX, 12 button system is similar to the 8 button system, but the additional buttons allow even more optional controls, e.g. slewing left and right, opening and closing of a grab, complex control of magnet beams, latching operations etc. The user can configure the transmitters to suit individual requirements, and program each button to perform its own customised task.

The transmitter is shown to scale relative to the 4 button transmitter

The crane specialists