TWO Handsets

Each system comes complete with an extra handset in either 4, 8 or 12 button configurations to meet all of your applications. Indoors or out.

Quality

Unlike many other radio remote control systems, Flex system uses top-quality microprocessors (encoding, decoding and RF) from well-known chip manufacturers such as MICROCHIP and CHIPCON. Every system is bench tested for 72 hours before delivery

Cost

Competitively priced, this amazing system really is within your grasp.

Ex Stock Availability

All systems available for immediate despatch or collection.

User Programmable

The flEX system is equipped with more than 200 user-programmable functions to suit all types of applications, no external programming is required.

Unique I-CHIP Design

The I-CHIP functions similar to SIM cards used on mobile phones, with the ability for the user to transfer information and settings from one transmitter to another. The flex system can also be set to full continuous transmission via the I-Chip setting (range: 1~60 minutes or continuous).

Durable & Rugged Enclosures

The transmitter and receiver enclosures are manufactured from industrial-strength nylon and fiberglass composite materials that are highly resistant to breakage and deformation even in the most aggressive environments. The enclosures are protected electrically to IP66.

Experience

Established for 50 years, Crane Services has the knowledge and expertise to offer a comprehensive back-up and repair service within 24 hours.

Certification

flEX systems are authorised to carry the following certifications:

EN 954-1:1996 CAT-3
EN 60204-32:1998
BS EN 13557:2003 (Annex C)
EN 300 200-3 V1.1.1 (R&TTE)
EN 301 489-3 V1.4.1 (EMC)
EN 60950:2000
FCC Rules Part-15
Industry Canada RSS-210

These the highest safety requirements in accordance with EU standards (safety of machinery and radio remote control). The certifications are issued after testing by Nemko who are authorised as a Notified Body.

Link to accessories

Transmitter Options

The flEX 4, 4 button system is designed for a two motion operation hoist. For example (1) Raise and lower (top two buttons) & left and right travel motion (bottom two buttons). (2) For any machine requiring up to 4 separate functions requiring two stages of operation. (3) The system can be programmed for more complex functions, e.g. latched outputs for floodlight control, selector switches and other special functions. The unit has dual depression buttons for two speed control.

This small receiver flEX 4 button system is ideal for mounting on a small hoist because of its compact size and little weight. (above: the transmitter is shown to scale relative to the 4 button unit).

The flEX 8, 8 button system is the industry standard for the overhead crane, being capable of controlling both long and cross travel motions with independent control of two hoist units plus the optional preselection of up to 4 crab units. All functions are equipped with dual depression buttons for twin speed operation. All buttons are user configurable with up to 200 functions available giving options such as 3 or 4 wire operation, special control functions for operation of dual speed motors, magnet control, 3 speed operation etc. The system is also capable of other diverse applications where remote control of mobile equipment is required, e.g. railway maintenance vehicles.

The flEX 12, 12 button system is similar to the 8 button but the additional buttons allow even more optional controls, e.g. slewing left and right, open and close of a grab, complex control of magnet beams, latching operations etc. The user can configure the transmitters to suit individual requirements, and programme each button to perform its own custom tasks.

Link to accessories

Click here to see our letter published in Hoist Magazine explaining safety standards and comparative performance issues.

Click the following to download as pdf

flEX Technical Leaflet
User Manual - flEX 4EX
User Manual - flEX 8EX
User Manual - flEX 12EX
EU Declaration of Conformity
EMC Test Reports